Filters
makelab filters icon white
BASICS
makelab arrow iconmakelab arrow down
Characteristics
PRICE
LEAD TIME
makelab icon info
Not sure what Lead Time means?
Commonly referred to as "production timelines" or "turnaround times," Lead Time denotes the duration required from when an order is placed to the point of dispatch.
makelab icon arrow
COLORS AVAILABLE
DETAILED
makelab arrow iconmakelab arrow down
3D PRINTING TECHNOLOGY
makelab icon info
Not sure what 3D Printing Technology means?
The type of 3D printing processes, all with varying limitations, benefits, and considerations.
makelab icon arrow
QUALITY (microns)
makelab icon info
Not sure what Quality means?
Alternatively identified as "resolution", "layer height", or "layer thickness", quality encompasses the specific dimension in the z-axis in which a part is 3D printed. This measurement is expressed in microns. Lower micron values correlate to a higher level of quality.
makelab icon arrow
SURFACE FINISH
makelab icon info
Not sure what Surface Finish means?
Varying greatly per 3D printing technology, Surface Finish is the textural characteristics on the topography of your part. Varying degrees of roughness are highly dependent on 3D printing technology and resolution chosen.
makelab icon arrow
MAX BUILD VOLUME
makelab icon info
Not sure what Max Build Volume means?
The size of a part a 3D printer can produce in 1 piece. This greatly varies per 3D printing technology.
makelab icon arrow
ADVANCED
makelab arrow iconmakelab arrow down
DIMENSIONAL ACCURACY (MICRONS)
makelab icon info
Not sure what Dimensional Accuracy means?
The measure of a 3D printed part's closeness to the digital version. Values given are a part's accuracy plus or minus to a feature.
makelab icon arrow
TENSILE MODULUS (GPa)
makelab icon info
Not sure what Tensile Modulus means?
Also known as "Young's Modulus", Tensile Modulus characterizes stiffness or resistance to deformation under stetching or pulling forces.
makelab icon arrow
0.2
4.1
ultimate tensile strength (mpa)
makelab icon info
Not sure what Ultimate Tensile Strength means?
Represents the maximum amount of stress that a material can withstand while being stretched or pulled.
makelab icon arrow
0.9
69
notched izod (J/meter)
makelab icon info
Not sure what Notched IZOD means?
Measuring impact resistance or toughness of a material, determines the material's ability to withstand sudden, sharp blows. Measured in the amoung of energy absorbed during fracture.
makelab icon arrow
18
13000
uv RESISTANt
makelab icon info
Not sure what UV Resistant means?
Ability to withstand the damaging effects of exposure to ultraviolet radiation from the sun and other sources of UV light without experiencing significant degradation, fading, or other adverse effects.
makelab icon arrow
chemical resistant
makelab icon info
Not sure what Chemical Resistant means?
Ability to withstand the potentially harmful effects of exposure to various chemicals, solvents, acids, bases, or other corrosive substances without undergoing significant degradation, corrosion, or deterioration
makelab icon arrow
elogantion at break (%)
makelab icon info
Not sure what Elongation at Break means?
Also known as "elongation to failure" or "ultimate elongation". Measures the percentage increase in length a material can undergo before it breaks or fails under a stretching load.
makelab icon arrow
2.3
200
shore a hardness
flexural modulus (gpa)
makelab icon info
Not sure what Flexural Modulus means?
Measures a material's stiffness in response to a flexural or bending force before undergoing permanent deformation or failure.
makelab icon arrow
0.66
3.63
heat deflection temp @0.45 mpa
makelab icon info
Not sure what Heat Deflection Temp means?
Also known as "Heat Distortion Temperature". Measures the temperature at which a material deforms under a constant load.
makelab icon arrow
41
175
Filtering by:
Tag Template
makelab icon x

🤷🏽

No results found.

Why not start with the important stuff in your filters, and then get more specific from there?
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

MAKELAB x INKBIT

Makelab is the exclusive on-demand 3D printing partner for Inkbit VCJ technology and materials like soft elastic and tough epoxy.

To learn more about VCJ, talk to us.

LOCATION & DELIVERY
LOCAL PICK-UP IN BROOKLYN, NYC
Available for pick up M-F 10am-5:30pm
Makelab Location Map
SAME-DAY DELIVERY
NYC Only
GROUND & EXPEDITED SHIPPING
USA + Internationally
GET YOUR PROJECT, ON TIME
1 business day
2 business days
3 business days
5 business days
7 business days
© 2023 All rights reserved. Designed by Makelab, Inc.